Pigmented Exterior Joinery CoatingsA range of high performance waterborne joinery coatings with ISO9001 accreditation. Morrells offer technical support with product demonstrations, specification writing and colour matching. Please consult our Practical Guide to Joinery Finishing for additional information. Please download the SDS & PDS sheets from link at the bottom of this page. EFWP730White Waterborne Primer with good opacity, grain filling, stain inhibiting and adhesion; for spray application. Formulated to provide a stain isolating basecoat for tropical hardwoods and other timbers rich in tannin and natural extractives. Application of 1 coat, to approximately 150 microns wet, over timber pre-treated with EIMW 4400 will provide a sufficient primer coat. Touch dry after 60 minutes, overcoating after 4 hours and stackable after 12 hours. Also available in Cream and Grey colours. EOWP230Waterborne Pigmented Topcoat with excellent weathering resistance; for spray or brush application. Formulated to provide a fast drying, water and block resistant finish for exterior joinery such as doors, window frames, cladding, fascias and soffits. Application of 1 or 2 coats, to approximately 325 microns wet, over timber pre-treated with EIMW 4400 will give full protection. Touch dry after 60 minutes, overcoating after 4 hours and stackable after 12 hours. Available in 30% or 60% sheen levels and RAL, BS colour shades. Exterior Joinery GuideDownload a practical guide for processing and coating wooden windows, doors, conservatories and wooden buildings. Download Guide to Joinery Finishing
Downloads |
Legals |Terms & Conditions | © 2008 Copyright Morrells Woodfinishes. All Rights Reserved.