Spray Equipment
In keeping with Morrells policy of offering a ‘one stop solution’ to supplying the professional furniture industry, our prospray section contains one of the most comprehensive ranges available. Whether you are looking for an artist brush or a complete spray pack system the chances are Morrells can supply it!
The Morrells Signature 2 Special Edition Spray Gun
The Morrells Signature range of compliant spray guns are available as a pressure feed spray gun and as a complete gun kit with paint cup in Gravity & Suction feed. Stainless Steel fluid passageways fully compatible with all Paints and Fluids comes as standard on all the Morrells signature range.
Re-defines operator comfort, atomisation, paint transfer efficiency and spray finish quality – Ultra Lightweight for “all day long” operator comfort and with a trigger design with Smoother trigger pull – further reduces operator fatigue and RSI risk.
Compliant Spray Guns HVLP/LVLP & Compliant Spray Guns
Compliant spray guns are now becoming more commonplace in the sprayshop environment to reduce costs and to comply with current legislation. All spray plant equipment needs to be operated correctly to achieve maximum transfer efficiency. Investing in the right equipment for the application is important but operator training must be considered in order to get the best out of the equipment.
HVLP, LVLP and Compliant guns in the Prospray range all exceed the compliancy transfer efficiency of 65% giving minimal waste of materials in the spraying process. This range comes in gravity, suction and pressure fed configurations. Supplied and supported by leading manufacturers Kremlin and ITW.
Product Codes
| SFLGG514 | 1.4mm Flg5 Gravity Spray Gun | EACH |
| SFLGP514 | 1.4mm Flg5 Pressure Spray Gun | EACH |
| SFLGS518 | 1.8mm Flg5 Suct/Pres Spray Gun | EACH |
| SANB300 | Apollo Professional Gun | EACH |
| SMULGUN | HVLP Gun 1.3mm For Rigo/Multispray | EACH |
| SSRIG21010 | 1.0mm SRI Gravity Spray Gun | EACH |
Air Controls
Product Codes
| SA2018 | Gun Mount Air Regulator | EACH |
| SDVFR3 | 2 Outlet Filter/Regulator | EACH |
| S1401MANO | Gun Mount Regulator & Gauge | EACH |
| SPR12 | Air Regulator 1/2”Fem 2 Outlet | EACH |
| SAFR1 | PCL1/2" Filter Reg With Gauge | EACH |
| SPR38 | Compressor Air Regulator 8/8" M2 Outlet | EACH |
Spray Booth Coatings
Product Codes
| R011B | Peelable Booth Coat (Propeel) | 5L |
Sanders & Polishers
Product Codes
| CEMM000260 | Electric Polisher – Vari.Speed | EACH |
| S59040 | Dyna 2mm/150mm NV Sander | EACH |
| S59043 | Dyna 2mm/150mm SGV 6h/V Sander | EACH |
| S59044 | Dyna 2mm/150mm CVR 6h/V Sander | EACH |
| S50617 | Dynabrade Dust Bag and Hose | EACH |
| SAPP760 | PCL 5mm Orbit Sander 150mm 6i-hole Velcro Extraction Pad | EACH |
Portable Compressors
Product Codes
| SAB50/360 | Compressor 9fad/3hp/240v/50l | KIT |
Static Compressors
Product Codes
| SAF14/150 | Compressor 9fad/3hp/240v/150L | KIT |
| SAF14/200 | Compressor 9fad/3hp/240v/200L | KIT |
| SAF15/150/1 | Compressor 10fad/3hp/240v/150L | KIT |
| SAF15/150/3 | Compressor 10fad/3hp/3ph/150L | KIT |
| SAF15/200/1 | Compressor 10fad/3hp/240v/200L | KIT |
| SAF15/200/3 | Compressor 10fad/3hp/3ph/200L | KIT |
| SAF18/200 | Compressor 13fad/4hp/3ph/200L | KIT |
| SAF21/200 | Compressor 16fad/5hp/3ph/200L | KIT |
| SAF29/200 | Compressor 23fad/7.5hp/3ph/200L | KIT |
Lower Pressure Filters & Strainers
Product Codes
| R010E | Cone Paint Strainers Fine | 10PK |
| R014E | Cone Paint Strainers Med | 10PK |
| SGFS12 | Economy Gravity Filters | 12PK |
| SKIT724 | Economy Suction Filter | 10PK |
Airmix & AAA Spray guns
Product Codes
| S151260960 | XCITE 120 Gun Kit, Excl Tip | KIT |
| SAA4400M75 | Binks AA400M Gun Kit Excl Tip | KIT |
Spray Booth Filters
Product Codes
| SA450/50M | MLG 450mm2/50mm Mesh Filter | EACH |
| SA450/50P | MLV 450mm2/50mm Pleated Filter | EACH |
| SA500/50M | MLG 500mm2/50mm Mesh Filter | EACH |
| SA500/50P | MLV 500mm2/50mm Pleated Filter | EACH |
| SA600/50M | MLG 600mm2/50mm Mesh Filter | EACH |
| SA600/50P | MLV 600mm2/50mm Pleated Filter | EACH |
| SFGM100/20 | PAX1000 100mm/1m Glass Fibre Filter | 20M |
| SFGM50/20 | PAX0500 50mm/1m Glass Fibre Filter | 20M |
| SFILTP | Booth Filter Paper 900mmx9m | EACH |
| SMS290 | MS290 25mm/1m Air Input Filter | 20M |
| SFLITP | Binks Standard Booth Filter paper 900mm x9m | EACH |
| SHEFILTP | Binks Super Efficiency Filter Paper 900mm x6m | EACH |
Conventional Spray Guns
Morrells have a selection of HVLP/LVLP/Compliant spray guns, transfer efficient high pressure pumps and Conventional spray guns, covering just about every application in the spray shop. Choose from gravity-fed, pressure or suction cup systems for the perfect solution to your spray gun requirements.
Product Codes
| S827828KIT | Twin Gravity Gun Kit (2 Guns) | KIT |
| S9400 | Palm Grip Blowgun | EACH |
| SA701308 | 0.8mm Mini Gravity Gun | EACH |
| SA704316 | 1.6mm/43 Cap Suction Spray Gun | EACH |
| SA704318 | 1.8mm/43 Cap Suction Spray Gun | EACH |
| SA704320 | 2.0mm/43 Cap Suction Spray Gun | EACH |
| SAS82725 | 2.5mm Gravity Spray Gun | EACH |
| S140100 | JWL Blowgun - Straight Pipe | EACH |
| S140101 | JWL Blowgun - Angled Pipe | EACH |
| SG289255 | 1.8mm Graco Finex Pressure Gun | EACH |
| SG289246 | 1.8mm Graco Finex Gravity Gun | EACH |
.jpg)
Low Pressure Spray Systems
Turbine low pressure systems are totally portable and ideal for on site work and low scale production. They are particularly suitable for use with low viscosity materials, and operate around a very safe 10 psi level. They are simple to disassemble and clean too. We offer a selection of finishing systems from the leaders in the field, including Apollo,Graco & Kestrel.
Product Codes
| SAPT10 | 10L Press.Tank – No Agitator | EACH |
| SAPT10M | 10L Press.Tank – Hand Agitator | EACH |
| SMOD1500-3 | Apollo PS 1500 Turbine & Gun | KIT |
| SMULTI | Mini Rigo/Multispray System | KIT |
| SMULTI110V | Mini Rigo/Multispray (110V) | KIT |
| SPT948 | Kestrel 2L Remote Cup & Hoses | KIT |
| SG289353 | Graco Finex Airspray DD Pump & Gun | KIT |
| SG257830 | Graco HVLP 9.0 Turboforce 220 Volt | KIT |
High Pressure Spray Systems
Morrells also offer a comprehensive range of high pressure pump systems from well regarded manufacturers such as Kremlin and DeVilbiss. These pumps are available in wall & trolley/cart mounted versions and offer a number of benefits over conventional spray equipment. The biggest bonus with this type of equipment is the transfer efficiency where the minimal overspray caused by the low atomising air pressure can result in 81% of materials on the job compared to less than 40% with conventional guns.
Product Codes
| S151260978 | Kremiln EOS 30C25 Airmax WM Xcite Gun excl tip | KIT |
| S151140220 | Kremiln EOS Trolley only | EACH |
| S151140230 | Kremlin EOS 6L Hopper Kit | KIT |
| SGG30W17 | Graco Mekur AAA System/Wall/G40R with RAC tip | KIT |
| SG289694 | Graco Mekur Cart Conversion Kit | KIT |
Spray Shop Equipment
Product Codes
| SDR0600 | Drying Rack 550mm Wide 15 Bar | EACH |
| SDRXP1 | Expander Drying Rack 11 Bar | EACH |
| SH02701 | Hotspot 2.8KW 240V/16A Heater | EACH |
| SR1001 | Spray Turntable – Adjustable | EACH |
| SR1002 | Spray Turntable – Budget Model | EACH |
| SUCC25 | Unic Air Powered Can Crusher – Up To 25L | EACH |
| SUGC2005 | Unic Auto Spraygun Cleaner | EACH |
| SH02700 | Rhino Junior 2.8KW 100v Heater | EACH |
| SH02071 | Rhino Junior 2.8KW 240v Heater | EACH |
| SH029300 | Rhino TQ3 2.8KW 110V Heater | EACH |
| SH029400 | Rhino TQ3 2.8KW 240V Heater | EACH |
.jpg)
Standard Low Pressure Hoses
Product Codes
| SAL15/10C | 10M 8MM Red Air Hose – 1/4”F | EACH |
| SAL15/15C | 15M Red Air Hose 5/16 1/4”BSP | EACH |
| SAL15/5C | 5M 8MM Red Air Hose – 1/4”F | EACH |
| SAL15/75C | 7.5M 8MM Red Air Hose – 1/4”F | EACH |
| SLPV14/10C | 10M 6MM LP Fluid Hose – 3/8”F | EACH |
| SLPV14/5C | 5M 6MM LP Fluid Hose – 3/8”F | EACH |
| SLPV14/75C | 7.5M 6MM LP Fluid Hose – 3/8”F | EACH |
| SLPV16/10C | 10M 10MM LP Fluid Hose – 3/8”F | EACH |
| SLPV16/5C | 5M 10MM LP Fluid Hose – 3/8”F | EACH |
| SVOW14/5B | 5M Twin LP Air & Fluid Hose | SET |
| SVOW14/75B | 7.5M Twin LP Air & Fluid Hose | SET |
Kremlin & Graco High Pressure Hoses
Product Codes
| Kremlin | ||
| S050382109 | 5mx7mm Id Airmix Air Hose | EACH |
| S050382110 | 10mx7mm Id Airmix Air Hose | EACH |
| S050382114 | 7.5mx7mm Id Airmix Air Hose | EACH |
| S050450801 | 5mx4.8mm Airmix Fluid Hose | EACH |
| S050450802 | 10mx4.8mm Airmix Fluid Hose | EACH |
| S050450808 | 7.5mx4.8mm Airmix Fluid Hose | EACH |
| S129270087 | 10m Layflat Hose Covering | 10M |
| Graco | ||
| SG241812 | 7.5m Graco Fluid Hose | EACH |
| SG256390 | 7.5m Graco Air Hose | EACH |
QR Connectors & Fittings
Product Codes
| S520302 | 1/4”BSP(F) High Flow Tail | EACH |
| S520312 | 1/4”BSP(M) High Flow Tail | EACH |
| S530002000 | 1/4”BSP(F) High Flow Coupling | EACH |
| S530012000 | 1/4”BSP(M) High Flow Coupling | EACH |
| SAC21CF | 1/4”BSP(F) PCL Standard Coupling | EACH |
| SAC21CM | 1/4”BSP(M) PCL Standard Coupling | EACH |
| SACA2593 | 1/4”BSP(M) PCL Standard Tail | EACH |
| SACA2746 | 1/4”BSP(F) PCL Standard Tail | EACH |
| SB120F | 1/4”(F) High Flow Swivel Tail | EACH |
Devilbiss Dekups Disposable Cup System
Morrells now stock the Devilbiss “Dekups” disposable
cup system is the quick, easy and secure way to spray
with minimal paint wastage. The lightweight cup liner
collapses as the paint is used providing a constant paint
flow with minimal paint wastage which saves paint and
the environment! Dekups are supplied in ready to use
dispenser wall pack’s complete with 50 disposable lids
and liners. The Dekups Gravity cup can be used on all
of the main DeVilbiss spray guns including Advance HD,
Compact, GTiHD, GFGHD etc and adaptors are also
available to fit Dekups to other manufacturers spray guns.
Product Codes
| SDPCP10K50 | Dekups Disposable Cup System | KIT |
| SDPC611K2 | Dekups Reusable Lids And Sleeve | 2PK |
| SDPC27K10 | Dekups Cup Filter 200m | 10PK |
| SDPC42K20 | Dekups Filter Screen 125m | 20PK |
| SDPC8K2 | Dekups Cleaning Bottle | 2PK |
| SDPC22K3 | Dekups Disposable Funnels | 3PK |
| SDPC62K10 | Dekups Measuring Guide 2:1/3:1 | 10PK |
| SDPC63K10 | Dekups Measuring Guide 4:1/5:1 | 10PK |
| SDPC63K10 | Dekups Plug Kit | 10PK |
| SDPC80 | Dekups Adapter - Dev Gravity | EACH |
3M PPS Disposable Cup System
3M™ PPS™ Paint Preparation System is a
unique, closed paint system which eliminates the
need for separate mixing cups and filters. Instead,
paint is mixed in a liner bag which marries to a
direct filter and is then mounted on the spray gun
with a dedicated adapter. As freshly filtered paint
is dispensed, the liner bag collapses, allowing the
spray gun to function at any angle. Liner bag and
filter are disposable, leaving only the spray gun
and adapter to be cleaned. 3M™ PPS™ Paint
Preparation System is therefore a cleaner, faster
system, safe from outside contamination and
offering considerable time and solvent savings on
gun and parts cleaning
Product Codes
| R3M1600102 | 3M16001 Standard PPS Mixing Cups | 2PK |
| R3M1600050 | 3M16000 Standard PPS Lid & Liners | 50PK |
| R3M16023 | 3M16023 Large PPS Mixing Cup | EACH |
| R3M1602425 | 3M16024 Large PPS Lid & Liners | 25PK |
| R3M16012 | 3M16012 PPS Wash Bottle | EACH |
| R3M16022 | 3M16022 Mixing Sticks | 25PK |
| R3M16032 | PPS Adaptor 2 -AS827/W400 | EACH |
| R3M16033 | PPS Adaptor 3 -Dev Gravity | EACH |
| R3M16036 | PPS Adaptor 6 -Kremlin Gravity | EACH |
| R3M16742 | PPS Adaptor 16 -Suction Guns | EACH |