morlux®
UV coatings
The morlux range of is designed for mass production, cures by ultra-violet light in less than one second and is emission free. Roller coaters are used for flat panel stock while shaped compnents are sprayed or vacuum coated. morlux products meet FIRA 6250 Sever Use standard and are suitable for wooden furniture and components, wood floors and mouldings.
6042/0XX – Morlux Sealers/Basecoats
Formulated on a combination of resins, fillers and initiators, these products are suited to various substrates – veneer, solid wood and engineered board. With excellent sanding properties they provide a smooth and resilient base for application of Morlux topcoats.
Product Codes
| 6042/0XX |
|
| 6X41/001 |
|
| 6X41/003 |
|
| Pack Sizes Available: 20L |
|
Health & Safety and Data Sheets: |
|
6X41/001 – Morlux Topcoats
The careful selection of resins, matting agents, waxes and photoinitiators has produced coatings that
are ideally suited to application by conventional rollercoaters. They offer superb chemical and physical
resistance properties coupled with a smooth aesthetic appearance and touch.
Product Codes
| Pack Sizes Available: 20L |
|
Health & Safety and Data Sheets: |
|
6X41/003 – Morlux “Opti” Topcoats
The balanced combination of resins, matting agents, waxes and photoinitiators have been formulated to be applied over pre-sealed substrates using grooved “Opti” or “Lazer” rollercoaters. As with the conventional topcoat they provide a smooth and aesthetically pleasing finish with excellent chemical and physical resistance properties.
Product Codes
| Pack Sizes Available: 20L |
|
Health & Safety and Data Sheets: |
|
6X41/041 – Morlux Combi Lacquers
These Lacquers are based on a combination of solvent free UV Curable acrylate resin systems and selected fillers. They have been specifically formulated to provide the benefits of a conventional basecoat coupled with the surface properties of a topcoat, for use as a coat-oncoat system.
As with all Morlux products they offer supreme chemical and physical resistance properties in combination with a very flat and smooth surface finish.
Product Codes
| Pack Sizes Available: 20L |
|
Health & Safety and Data Sheets: |
|
6X91/404 – Morlux Waterborne UV Lacquers
With excellent drying properties and adhesion to various substrates, these lacquers provide finishes with superb appearance and feel. They are formulated for autospray application and therefore are ideally suited to finishes on profiled and routered panels.
Product Codes
| Pack Sizes Available: 20L |
|
Health & Safety and Data Sheets: |
|
6X21/0XX – Morlux Vacuum Coater Lacquers
These products are specifically formulated to be low viscosity for vacuum coating, their reactivity allows them to be used at line speeds in excess of 50m per minute.
Product Codes
| Pack Sizes Available: 20L |
|
Health & Safety and Data Sheets: |
|
| Top of Page |
