Waterborne Lacquers & Fastmatch colours

Morrells - The Home of Wood Finishes

High Performance Waterborne Lacquers

A range of ultra high performance waterborne lacquers offering excellent clarity and build. Can be used over 8004/341 sealer or coat-on-coat and offers similar performance properties to a high quality Acid Catalyst lacquer being certified to FIRA Standard 6250: 2005 for horizontal surfaces (excluding kitchen worktops) in Heavy/Severe Use. No catalyst is required thus avoiding extra mixing and the health hazards associated with external cross linking hardeners.

  • Pack sizes available: 5L and 25L
  • Touch dry: 30 mins minimum @ 18°C.
  • Sandable: 2 hours @ 18°C.
  • Recoatable: 2 hours @ 18°C
  • Packing: Overnight minimum
  • Coverage: 40m2 per 5 litres
  • Tinting: Use Morrells Compliant Water Stains up to a maximum of 2%
  • Typical Finish: 2 coats at 75g/m2 per coat, coat-on-coat or with 8004/341 sealer

Data Sheet 14 - High Performance Waterborne Lacquers

Fields marked with a * are required

High Solids Waterborne Lacquers

This range of high build lacquers was developed to enhance timber’s natural beauty with a high degree of clarity. Similar in look and durability to a high performance pre-catalysed lacquer with a silky-smooth feel and a crisp, hard finish ideal for furniture, architraves, frames and mouldings. 332 lacquers are very easy to spray, with superb hold-up on vertical surfaces.

  • Touch dry: 30 mins minimum @ 18°C.
  • Recoatable: 2 hours @ 18°C.
  • Coverage: 40m2 per 5 litres
  • Tinting: Use Morrells Compliant Water Stains up to a maximum of 2%
  • Sandable: 2 hours @ 18°C.
  • Packing: Overnight minimum
  • Typical Finish: 2-3 coats at 75g/m2 per coat, coat-on-coat or with 8004/341 sealer

Data Sheet 16 - High Solids Waterborne Lacquers

Fields marked with a * are required

Waterborne ‘Wood Warming’ Sealer 8004/341

A ‘next generation’ Waterbased sealer that not only exhibits a good in-can clarity but has been specially formulated to enhance the timbers natural beauty or ‘anfeuerung’ (higher depth and definition to grain structure), allowing for high clarity finishes even when over-coated with low gloss topcoat systems.

This sealer has been designed to be universally over-coatable with all of Morrells waterborne and solvent borne topcoats.

  • Pack sizes available: 5L and 25L.
  • Touch dry: 30 mins minimum @ 18°C.
  • Recoatable: 2 hours @ 18°C.
  • Coverage: 40m2 per 5 litres
  • Tinting: Use Morrells Compliant Water Stains up to a maximum of 2%
  • Sandable: 2 hours @ 18°C.
  • Packing: Overnight minimum

Data Sheet 15 - Waterborne 'Wood Warming' Sealer

Fields marked with a * are required

Waterborne Colours

A range of high opacity waterborne coatings designed for spray application to domestic furniture and shopfittings. All colours are made to order and quality controlled at Headquarters. No catalyst is required thus avoiding extra mixing and the health hazards associated with external cross linking hardeners.

  • Touch dry: 30 mins minimum @ 18°C.
  • Recoatable: 2 hours @ 18°C.
  • Coverage: 40m2 per 5 litres
  • Sandable: 2 hours @ 18°C.
  • Packing: Overnight minimum
  • Typical Finish: 2 coats at 75g/m2 per coat, coat-on-coat or with 8005/501 primer

Waterborne colours

Data Sheet 17 - Waterborne Colours

Fields marked with a * are required

White Anycoat Waterborne Primer

A high performance white primer which can be over-coated with any Morrells solvent or waterborne coating. Also noted for its low grain raising, good hiding power and crisp sanding, this primer can be used under solvent-borne topcoats to reduce VOC emissions.

  • Pack sizes: 5L & 25L
  • Touch dry: 15 mins @ 18°C.
  • Recoatable: 30 mins @ 18°C.
  • Coverage: 40m2 per 5 litres
  • Sandable: 30 mins @ 18°C.
  • Packing: Overnight minimum

Data Sheet 18 - White Anycoat Waterborne Primer

Fields marked with a * are required

8005/641 High Solids White Waterborne Primer

A high solids, easy sand product with exceptional covering power, designed for use on MDF and all wooden substrates.

  • Pack sizes: 5L & 25L
  • Touch dry: 30 mins @ 18°C.
  • Recoatable: 2 hours @ 18°C.
  • Coverage: 40m2 per 5 litres
  • Sandable: 2 hours @ 18°C.
  • Packing: Overnight minimum

Data Sheet 19 - High Solids White Waterborne Primer

Fields marked with a * are required

 

 

 

 

Close
loading...